Six important points for a top evisceration operation

If done incorrectly, automatic evisceration can lead to fecal contamination. This can happen during venting, opening of the carcass and during evisceration itself. Use of the correct techniques can significantly reduce or even eliminate this risk.

The blade opening the carcass should cut round the vent and not straight across it. This method avoids damaging the rectum and cutting through the gut and spilling its contents.

Eviscerators should be designed so that the entire viscera pack including the crop is removed undamaged in a single smooth movement.

Once the viscera pack has been automatically drawn, it should be removed from the carcass immediately. For many years now, this has usually involved transferring the pack automatically to a separate pack shackle suspended from its own overhead conveyor system. Packs are transferred with the intestine and vent hanging down and away from the edible giblets, which can then be harvested automatically. Packs should be compact with no trailing intestines long enough to touch and contaminate their neighbor.

In those plants, often handling lower capacities, where packs are not transferred to a separate pack shackle, these should be properly presented over the back of the carcass for easy veterinary inspection and manual giblet harvesting. A straight – as opposed to folded – foot evisceration shackle means that carcasses hang slightly obliquely with minimal contact between the carcass and the potentially contaminating viscera pack.

Today’s automatic evisceration systems must handle all commercial broiler weights at the highest line speeds. They should also be able to handle typical in-flock variances with no drop-off in performance. Yields and product quality should remain constant. Correct positioning and the ability to fine-tune eviscerator settings to the flock currently being processed are essential if these goals are to be met.

Traditionally handwheels and levers were used to change machine settings. Digitalization has begun to take over this function, offering additional benefits. Quite apart from being able to set the machine from a touchscreen, these settings can now be stored in the software’s memory. Changing settings from one flock to the next can be done precisely and at a single touch.

It is said that the big advantage of automation is that machines don’t get sick, have off-days or need time off. Settings can, however, be incorrect. Machine parts can wear. Machines can of course break down. These potential problems can all compromise uptime, yield and final product quality.

Here too digitalization can help. Software is now available, which will alert plant management to underperforming equipment right down to an individual unit. This means that if one unit of an eviscerator is malfunctioning, this is immediately made visible on a central control console. The processing plant’s technical department then knows exactly where the problem is and can intervene quickly and effectively. Downtime and potential yield loss can therefore be kept to an absolute minimum.